You have no items in your shopping cart.
BOBINE ALLUMAGE 12V JEEP MB
Référence: WO913098
GTIN: 16.3
Fits Model : EARLY MB, MB, M201EARLY, EARLY GPW, GPW, CJ2A, CJ3A, CJ3B, CJ5
Weight: : 0,7200 Kg
INSTALLATION INSTRUCTIONS
COILS FOR 12-VOLT SYSTEMS
RESISTOR NOT REQUIRED
1. DO NOT INSTALL these coils on 12-volt systems equipped with a resistor or with resistance built into the wiring harness.
2. SELECT THE RIGHT COIL by referring to the application guide in the catalog.
3. COIL POLARITY MUST BE CORRECT. If the negative battery post is grounded, the coil terminal
marked (-) must be connected to the distributor. If the positive post is grounded, connect the coil marked (+) to the distributor.
4. All connections must be clean and tight. Make sure the coil high tension wire is firmly seated in the coil tower and the spark plug wires are firmly seated in the distributor cap towers
COILS FOR 12-VOLT SYSTEMS
RESISTOR NOT REQUIRED
1. DO NOT INSTALL these coils on 12-volt systems equipped with a resistor or with resistance built into the wiring harness.
2. SELECT THE RIGHT COIL by referring to the application guide in the catalog.
3. COIL POLARITY MUST BE CORRECT. If the negative battery post is grounded, the coil terminal
marked (-) must be connected to the distributor. If the positive post is grounded, connect the coil marked (+) to the distributor.
4. All connections must be clean and tight. Make sure the coil high tension wire is firmly seated in the coil tower and the spark plug wires are firmly seated in the distributor cap towers
Prix de vente25,06 €
Prix de base20,88 €
Total Tax: 4,18 €
X
1.27
